Readers ask: How To Use A Compressor Properly For Vocals?

How do you use a voice compressor?

How to compress voice over audio

  1. Start by reseting the compressor to a neutral setting.
  2. Increase the threshold so that your louder elements are triggering the compressor.
  3. Set the ratio from 2:1 to 4:1, whichever sounds more natural on your recording.
  4. Play with the attack time to get a more natural sound.

When should you use compression on vocals?

You can use compression on vocals to just even out the performance and to create an effect. If you use a compressor to even out a vocal performance, you don’t want to hear the compressor working. Instead, you just want to catch the occasional extremely loud transient that would cause clipping.

What does a compressor do on vocals?

Simply, a compressor is used to compress a sound’s dynamic range. That is, to make the louder and quieter parts of the sound’s performance closer to each other in level. It does this in one of two ways. In “downward compression,” the compressor attenuates the signal when it gets too loud.

You might be interested:  Often asked: Who Sang Lead Vocals On Africa?

What is a good EQ setting for vocals?

Best EQ Settings for Vocals

  • Roll off the low-end starting around 90 Hz.
  • Reduce the mud around 250 Hz.
  • Add a high shelf around 9 kHz & a high roll off around 18 kHz.
  • Add a presence boost around 5 kHz.
  • Boost the core around 1 kHz to 2 kHz.
  • Reduce sibilance around 5 kHz to 8 kHz.

How can I make my voice sound thicker?

Once you apply these ten techniques, your mixes as a whole will improve.

  1. Top-End Boost.
  2. Use a De’Esser.
  3. Remove Resonances.
  4. Control the Dynamics with Automation.
  5. Catch the Peaks with a Limiter.
  6. Use Multiband Compression.
  7. Enhance the Highs with Saturation.
  8. Use Delays Instead of Reverb.

How do you make vocals in punchy?

A fast attack (5ms) will make your vocals sound thick and heavy. A slow attack (30ms) will make your vocals sound punchy and aggressive. Dial in a medium release time of 40ms and adjust from there. Try to get the compressor pumping in time with the music.

What does too much compression sound like?

When you compress too hard with fast attack times, the dynamic range of your mix is squashed. You’ll end up with something that sounds like this: A song with no room to breathe; as flat as a pancake.

How loud should vocals be in a mix?

Every vocal is different and every song is different as well. But generally speaking, lead vocal should be moderately loud or the loudest element next to your drums in your mix.

Should you compress or EQ first?

Each position, EQ pre (before) or EQ post (after) compression produces a distinctly different sound, a different tonal quality, and coloration. As a rule, using EQ in front of your compressor produces a warmer, rounder tone, while using EQ after your compressor produces a cleaner, clearer sound.

You might be interested:  How To Get Rid Of P Sound In Vocals?

Why do my vocals sound bad?

If your vocals are recorded in a bad room, it’s extremely obvious by the end of the mix. The room that an instrument is recorded in always changes the tone. This is ESPECIALLY true for vocals. Room reflections can also cause compression and pitch correction to sound unnatural.

How do you add warmth to vocals?

Use Parallel Processing Instead of adding all the processing on the track itself, experiment with parallel processing. I like a good LA2A in parallel on vocals, sometimes with an analog-style EQ that’s boosted in the low-mids. Added underneath, it can give your vocals all the warmth you need.

What is the best compressor for vocals?

The Best Vocal Compressors for Studio-Quality Audio

  • Avalon. VT-737SP. A go-to for professional pop, R&B, & rap studio recordings.
  • Warm Audio. WA76. This limiting amplifier is designed to affordably emulate the classic UA 1176, which is nearly impossible to find these days.
  • FMR Audio. Really Nice Compressor.

What is the best compressor for rap vocals?

Top 10 Compressor Plugins for Hip Hop Vocals

  • Fabfilter Pro-C.
  • Eventide Ultrachannel.
  • Waves Renaissance Compressor.
  • Waves CLA-76.
  • McDSP 6030 Ultimate Compressor.
  • Waves V-Comp.
  • Logic Compressor.
  • Waves H-Comp.

What is the main purpose of a compressor?

The purpose of the compressor is to circulate the refrigerant in the system under pressure, this concentrates the heat it contains. At the compressor, the low pressure gas is changed to high pressure gas.

Leave a Reply

Your email address will not be published. Required fields are marked *