- 1 Should I use reverb on live vocals?
- 2 How do you add delay to vocals?
- 3 How can I thicken my live vocals?
- 4 What is a good reverb setting for vocals?
- 5 How do I make my microphone reverb?
- 6 Is Plate reverb best for vocals?
- 7 Should I use delay and reverb together?
- 8 What vocal effects do singers use?
- 9 How many ms delay for vocals?
Should I use reverb on live vocals?
Use stereo reverb with caution, better to use mono reverb. If you use too much reverb on vocals you will push them deeper/further in the mix.
How do you add delay to vocals?
10 Delay Tips for Mixing Vocals
- Humble foundations: The simple slap.
- Delay timing: Set to match tempo and pace.
- Sculpt the delay with filters.
- Use stereo slap for a bigger, wider sound.
- Use repeating delays to enhance important lyrics.
- Add delay throws.
- Add movement to delay.
- Delays on tap: Use a tap plugin for added control.
How can I thicken my live vocals?
Use temporal, tuning, and low level compressing effects to create a vocal that sounds thick, and dense enough to cut through your mix. The idea is to create multiple reflections and voices, that can be combined with and augment the original signal.
What is a good reverb setting for vocals?
Move the pre-delay to about 30-40% or so as a starting point and see how it sounds. With your EQ, maybe set the high-pass around 200Hz and the low-pass at about 12kHz. In a situation like this, you may want to have more body in the reverb.
How do I make my microphone reverb?
An effective solution is to plug the microphone into a preamp box that is made to create reverb and other audio effects and add them to audio signals passing through the box. The preamp is connected to the sound card inputs at the back of the computer.
Is Plate reverb best for vocals?
Plate reverb works well on many vocals for a couple of reasons. First, you usually want your vocal to cut through the mix. Plate reverb’s bright tone boosts the presence of the vocal, helping it cut through more easily. Second, the slightly unnatural sound of a plate can help the vocal feel unique.
Should I use delay and reverb together?
Since reverb and delay often fill the same space in a mix, be sure your use of them is complementary. If you want to use delay and reverb in series — meaning one effect feeds into the other — experiment with the order. Delay before reverb creates a longer pre-delay effect for the reverb that you may enjoy.
What vocal effects do singers use?
The options available for vocal effects are broad. They include reverb, delay, choir, distortion, compression, gain automation, de-essing, EQ, pitch shift, and echo.
How many ms delay for vocals?
Stereo slap delay is a great choice when you want to create sense of space for lead vocals, especially in a faster song like in the video. Listeners can’t pinpoint the delays, but they can feel the space. Go with little or no feedback and somewhere around 80 – 120 ms delay time.