- 1 How do you make your voice pop?
- 2 How much compression do you need for pop vocals?
- 3 How do you compress vocals for pop?
- 4 What is a pop voice?
- 5 Where can I get high pass vocals?
- 6 How can I get good voice?
- 7 How do I change my voice to like a pro?
- 8 What is a good EQ setting for vocals?
- 9 How loud should vocals be in a mix?
- 10 Should you compress or EQ first?
- 11 What is the best compressor for vocals?
How do you make your voice pop?
VOCAL POP TIP 1: NO MATTER THE MIC YOU USE, USE EQ
- High-pass filter.
- High boost for “air.” A common characteristic of high-quality microphones is a boost in the 6–10 kHz range.
- Cut the “honk.” Sometimes your vocal might pop out a little more than desirable, somewhere in the 2–5 kHz range.
- Before you compress, automate!
How much compression do you need for pop vocals?
For most pop, rap, and rock-based genres you’re going to squash the vocals a lot more than you expect, especially due to the mixes being denser. So, for dynamic compression, start with a 5:1 ratio and explore going higher, even up to an 8:1 ratio, depending on the threshold.
How do you compress vocals for pop?
This is how to compress vocals using a lighter, more musical approach:
- First of all, load up a compressor.
- Next, lower the threshold and raise the ratio to extreme settings.
- Start with a medium attack time around 15ms and adjust to taste.
- Dial in a medium release time of 40ms and adjust from there.
What is a pop voice?
The key features of a ‘pop’ singing style Singing the words as closely to speech as possible. So not the lengthened vowels and clipped consonants of classical singing. Often this means singing in your ‘speech quality’ voice rather than your upper register. Pop inflections aren’t an add-on.
Where can I get high pass vocals?
Start the high pass quite low, around 70Hz, and gradually move it up the frequency spectrum until you start to hear it making the vocal sound thinner. This will usually be somewhere between 120Hz – 200Hz. Once you hear it thinning out the vocal you know you’ve gone too far.
How can I get good voice?
Here are seven suggestions for ways to maintain vocal health for singers.
- Warm up—and cool down.
- Hydrate your voice.
- Humidify your home.
- Take vocal naps.
- Avoid harmful substances.
- Don’t sing from your throat.
- Don’t sing if it hurts.
How do I change my voice to like a pro?
7 Simple Tips to Mix Vocals Like a Pro
- Bring Them in Early. The beginning of a mix is like a blank canvas.
- Process Them in Context.
- Use Pre-Delay.
- Find the Right De-Esser.
- Avoid Ultra-Fast Attack Times.
- Don’t Rely on Compression Alone.
- Pay Attention to Breaths and Other Noises.
- 3 New Courses Just Released.
What is a good EQ setting for vocals?
Best EQ Settings for Vocals
- Roll off the low-end starting around 90 Hz.
- Reduce the mud around 250 Hz.
- Add a high shelf around 9 kHz & a high roll off around 18 kHz.
- Add a presence boost around 5 kHz.
- Boost the core around 1 kHz to 2 kHz.
- Reduce sibilance around 5 kHz to 8 kHz.
How loud should vocals be in a mix?
Every vocal is different and every song is different as well. But generally speaking, lead vocal should be moderately loud or the loudest element next to your drums in your mix.
Should you compress or EQ first?
Each position, EQ pre (before) or EQ post (after) compression produces a distinctly different sound, a different tonal quality, and coloration. As a rule, using EQ in front of your compressor produces a warmer, rounder tone, while using EQ after your compressor produces a cleaner, clearer sound.
What is the best compressor for vocals?
The Best Vocal Compressors for Studio-Quality Audio
- Avalon. VT-737SP. A go-to for professional pop, R&B, & rap studio recordings.
- Warm Audio. WA76. This limiting amplifier is designed to affordably emulate the classic UA 1176, which is nearly impossible to find these days.
- FMR Audio. Really Nice Compressor.