- 1 How do I fix sound only coming out of one speaker?
- 2 Why is Logic audio only recording one side?
- 3 Should vocals be panned?
- 4 How do you check if both speakers are working?
- 5 Why is my left speaker louder than my right?
- 6 Why can I only hear my mic in one ear?
- 7 What is mono audio in settings?
- 8 Is mono audio better?
- 9 Should I have mono audio on?
- 10 Where should vocals sit in a mix?
- 11 How loud should vocals be in a mix?
- 12 Do rappers double their vocals?
How do I fix sound only coming out of one speaker?
Check that both the speaker and the connected device are turned on. Turn up the volume of the speaker and the connected device. Check that the connected device is playing. Make sure the audio cable is disconnected from the AUDIO IN jack during playback in BLUETOOTH mode.
Why is Logic audio only recording one side?
Regarding the input, make sure you select stereo on the Channel Strip, the double circle on the input selector (click on it to toggle). If you see only one input on the meter, then you are sending only one channel from your audio interface.
Should vocals be panned?
The best way to give your mix a solid core is to keep lower frequency sounds in the center. That means kicks, basses and anything else below the 120hz range. If your track has lead vocals pan them center as well. But as a general rule lead vocals should always be panned center.
How do you check if both speakers are working?
Follow these steps:
- Right-click the Volume icon in the notification area.
- From the pop-up menu, choose Playback Devices.
- Select a playback device, such as your PC’s speakers.
- Click the Configure button.
- Click the Test button.
- Close the various dialog boxes; you passed the test.
Why is my left speaker louder than my right?
The reason is that the inherent meter tolerance when reading a noise signal means the two speakers will always end up being slightly different — enough to pull the phantom centre off slightly to one side.
Why can I only hear my mic in one ear?
The issue is actually that you are recording a mono input into a stereo track, as you have only one microphone. A Stereo input or track places Input 1 on the left and Input 2 on the right. A Mono input will place the single microphone correctly in the centre of the track.
What is mono audio in settings?
Created May 2019. Mono audio sends the same sound to both the left and right speaker or ear-bud. This can make it easier to follow audio content if your hearing is better in one ear than the other.
Is mono audio better?
For setting up sound for a live show where various speakers are arrayed to simply cover the area of the listeners for sound reinforcement, mono can be better because large areas are more difficult to set up so each listening position has relatively equal access to both left and right speakers.
Should I have mono audio on?
If you have hearing challenges and want to use iPhone with a headset connected, you should turn on the Mono Audio feature. However, if you’re hard of hearing or deaf in one ear, you’re hearing only a portion of the sound in your hearing ear, which can be frustrating.
Where should vocals sit in a mix?
Tip #1 – Here’s a top notch trick to get your vocals to sit on top of the mix nicely. Send everything but the vocals to their own aux, and apply a very subtle compressor (only a few dB’s reduction). Side chain the lead vocals to this compressor. This will dip the track by a 2 or 3 dB’s every time the vocals come in.
How loud should vocals be in a mix?
Every vocal is different and every song is different as well. But generally speaking, lead vocal should be moderately loud or the loudest element next to your drums in your mix.
Do rappers double their vocals?
Rappers and singers have traditionally recorded vocal doubles (informally called “vocal dubs”) on the ending phrases every bar or half a bar..