- 1 Should you use a compressor when recording vocals?
- 2 What plugins should I use for vocals?
- 3 Can you record with a compressor?
- 4 Should you record vocals without effects?
- 5 Which comes first compression or EQ?
- 6 What plugins to use for mastering?
- 7 How do I make my vocals sound professional?
- 8 What plugins do professionals use?
- 9 What is the best compressor for rap vocals?
- 10 How much should you compress vocals?
- 11 What level should I record vocals at?
- 12 How do you record vocals without a mic?
- 13 How loud should vocals be in a mix?
Should you use a compressor when recording vocals?
So perhaps the best advice is to conservatively apply the best of both worlds: use a little compression while recording — just enough to help limit the most unruly peaks and phrases and to even out the recorded signal — and then add more compression to taste during mixing.
What plugins should I use for vocals?
15 Best Vocal Mixing Plugins
- FabFilter | Pro-Q 3.
- Maag Audio | EQ4.
- Universal Audio | 1176 Classic Limiter Collection.
- Universal Audio | Teletronix LA-2A Classic Leveler Collection.
- Celemony | Melodyne 4 Studio.
- Slate Digital | Eiosis e2deesser.
- FabFilter | Saturn.
- FabFilter | Pro-G.
Can you record with a compressor?
Recording Through Compressor Plugins Using UAD plugins and a Universal Audio interface, you can bake processing into your recordings on the way into your DAW, and direct monitor a vocal performance with compression applied in real-time—this means that using a hardware compressor isn’t your only option.
Should you record vocals without effects?
Vocals should always be recorded dry. Meaning that there are no time based effects such as reverb and delay on the track when you record.
Which comes first compression or EQ?
Each position, EQ pre (before) or EQ post (after) compression produces a distinctly different sound, a different tonal quality, and coloration. As a rule, using EQ in front of your compressor produces a warmer, rounder tone, while using EQ after your compressor produces a cleaner, clearer sound.
What plugins to use for mastering?
Plugins like the Kramer Master Tape, PuigTec EQ, and the PuigChild Compressor are equally suitable in both worlds. Some, like maximizers or limiters and linear phase compressors or equalizers, are generally more suited for mastering work.
How do I make my vocals sound professional?
10 Ways to Make Vocals Sound Modern & Professional
- Top-End Boost.
- Use a De’Esser.
- Remove Resonances.
- Control the Dynamics with Automation.
- Catch the Peaks with a Limiter.
- Use Multiband Compression.
- Enhance the Highs with Saturation.
- Use Delays Instead of Reverb.
What plugins do professionals use?
Top 10 Music Production Plugins Preferred by Top Producers Today
- Softube – Saturation Knob.
- Camel Audio – Camelcrusher.
- Xfer Records – OTT Compressor.
- Native Instruments Reaktor 6.
- Spectrasonics Keyscape.
- Xfer Records Serum.
- iZotope – Ozone Imager.
- Valhalla – Freq Echo.
What is the best compressor for rap vocals?
Top 10 Compressor Plugins for Hip Hop Vocals
- Fabfilter Pro-C.
- Eventide Ultrachannel.
- Waves Renaissance Compressor.
- Waves CLA-76.
- McDSP 6030 Ultimate Compressor.
- Waves V-Comp.
- Logic Compressor.
- Waves H-Comp.
How much should you compress vocals?
A good starting point for a rock vocal would be a 4:1 ratio with a medium-fast attack and a medium release. Then, set the threshold for around 4 to 6dB of gain reduction. Increase or decrease the attack time until you get the right level of forwardness for the mix.
What level should I record vocals at?
You should record vocals at an average of -18dB for 24-bit resolution. The loudest parts of the recording should peak at -10dB and be lowest at -24dB. This is to keep an even balance on the level of the vocals without distortion.
How do you record vocals without a mic?
How to Record Good Audio Without a Microphone
- Keep Your Camera Close.
- Shoot Somewhere Quiet.
- Pick a Good Room.
- Protect your Built-In Mic from Wind.
- Use a Free Audio App.
- Do a Sound Check.
How loud should vocals be in a mix?
Every vocal is different and every song is different as well. But generally speaking, lead vocal should be moderately loud or the loudest element next to your drums in your mix.