Quick Answer: How To Stack Rap Vocals?

Should I stack rap vocals?

Stacking vocals is entirely a creative preference and is never required. It can make the song sound dope or it can make the song sound ridiculous.

Do rappers layer their vocals?

Another factor contributing to a tight vocal sound is how layers of vocals relate to each other. It’s standard practice for rappers to record a lead vocal, a double of it, and highlights (a track in which only certain words of the original vocal are performed to highlight or emphasize them).

Does Eminem double his vocals?

I bring Eminem up, because he’s talked in length about how many takes (more than 10) he does to get his vocal doubles sounding precise. I found this vocal only track of Eminem’s Lose Yourself (released in 2002) and you can hear the vocal double track as I defined it earlier.

What does stacking mean in rap?

If you are new to recording then chances are you may not be familiar with what stacks are. Stacks are also called “dubs” which is short for “double” which basically means you record your entire main vocals again on a separate track.

You might be interested:  Soul Singers Who Panned Their Vocals?

Do you have to layer vocals?

Loosely layered vocals will cause you to lose the intimacy you are trying to create. There is an effect you should be aware of though when layering these parts. If your performance is so tight then your vocals will start to sound phasey. Almost canceling out the center image.

How do you double your voice?

Double tracking vocals involves having your vocalist sing the exact same part of a song on a second track. This “vocal double” is then blended with the main vocal track, to enhance it’s sound.

How loud should rap vocals be?

What dB should vocals be recorded at? You should record vocals at an average of -18dB for 24-bit resolution. The loudest parts of the recording should peak at -10dB and be lowest at -24dB. This is to keep an even balance on the level of the vocals without distortion.

How do you mix rap vocals professionally?

How to Mix Rap Vocals

  1. Time-Align Vocal Layers. Having multiple layers of the same vocal line means they usually need some time-alignment.
  2. EQ-ing Rap Vocals.
  3. Compressing Rap Vocals.
  4. Using Delay Over Reverb.
  5. Effects for Doubles and Ad Libs.
  6. Conclusion: Mixing Rap Vocals.

How can I make my voice sound thicker?

Once you apply these ten techniques, your mixes as a whole will improve.

  1. Top-End Boost.
  2. Use a De’Esser.
  3. Remove Resonances.
  4. Control the Dynamics with Automation.
  5. Catch the Peaks with a Limiter.
  6. Use Multiband Compression.
  7. Enhance the Highs with Saturation.
  8. Use Delays Instead of Reverb.

What voice effects do rappers use?

The best vocal effects for rappers include de-essing, pitch shifting, time alignment, and parallel processing. Other great plugins that can help improve rap vocals include stutter and reverse effect, vocal delay throws, saturation, submixes, and distortion.

You might be interested:  Who Sang Vocals Drugs This Mortail Coil?

How do you EQ vocals like a pro?

Best EQ Settings for Vocals

  1. Roll off the low-end starting around 90 Hz.
  2. Reduce the mud around 250 Hz.
  3. Add a high shelf around 9 kHz & a high roll off around 18 kHz.
  4. Add a presence boost around 5 kHz.
  5. Boost the core around 1 kHz to 2 kHz.
  6. Reduce sibilance around 5 kHz to 8 kHz.

Where should vocals sit in a mix?

Tip #1 – Here’s a top notch trick to get your vocals to sit on top of the mix nicely. Send everything but the vocals to their own aux, and apply a very subtle compressor (only a few dB’s reduction). Side chain the lead vocals to this compressor. This will dip the track by a 2 or 3 dB’s every time the vocals come in.

Leave a Reply

Your email address will not be published. Required fields are marked *