Quick Answer: How Many Compressors On Rap Vocals?

How much compression should rap vocals have?

If your rapping to a trap beat which typically is bass heavy than you’re going to need a lot of compression for your vocals to cut through the mix. I would suggest using a ratio of 6:1 or 7:1 depending on the vocal performance and vocal tone. You will want a release of about 160 ms and threshold of -15 to – 20.

How many compressors do you need for vocals?

Combine two compressors and you’ll have plenty of possibilities for experimentation; play with the order of the compressors, with the threshold of each, with the compression ratios, with attack and release times, and with the balance between the two units; if there’s gain make-up on either (or both) compressor, you can

What is the best compressor for rap vocals?

Top 10 Compressor Plugins for Hip Hop Vocals

  • Fabfilter Pro-C.
  • Eventide Ultrachannel.
  • Waves Renaissance Compressor.
  • Waves CLA-76.
  • McDSP 6030 Ultimate Compressor.
  • Waves V-Comp.
  • Logic Compressor.
  • Waves H-Comp.

Should I compress rap vocals?

Although, rap and hip hop is an aggressive form of singing you never over compress it. These genres have phrases and words that should be clear in the track nor your listeners won’t listen to them correctly. So always avoid over compression for any type of vocals.

You might be interested:  Often asked: Vocals Quieter When I Mix Down To Wav?

Should you compress or EQ first?

Each position, EQ pre (before) or EQ post (after) compression produces a distinctly different sound, a different tonal quality, and coloration. As a rule, using EQ in front of your compressor produces a warmer, rounder tone, while using EQ after your compressor produces a cleaner, clearer sound.

Do rappers double their vocals?

Rappers and singers have traditionally recorded vocal doubles (informally called “vocal dubs”) on the ending phrases every bar or half a bar..

How do you make vocals in punchy?

A fast attack (5ms) will make your vocals sound thick and heavy. A slow attack (30ms) will make your vocals sound punchy and aggressive. Dial in a medium release time of 40ms and adjust from there. Try to get the compressor pumping in time with the music.

How do you set EQ for vocals?

Best EQ Settings for Vocals

  1. Roll off the low-end starting around 90 Hz.
  2. Reduce the mud around 250 Hz.
  3. Add a high shelf around 9 kHz & a high roll off around 18 kHz.
  4. Add a presence boost around 5 kHz.
  5. Boost the core around 1 kHz to 2 kHz.
  6. Reduce sibilance around 5 kHz to 8 kHz.

What is the best air compressor for home use?

Our Top Picks

  • BEST OVERALL: CRAFTSMAN 6-Gallon Pancake Air Compressor.
  • RUNNER-UP: PORTER-CABLE C2002-WK Oil-Free Pancake Air Compressor.
  • BEST BANG FOR THE BUCK: California Air Tools CAT-1P1060S Air Compressor.
  • BEST FOR INFLATING: EPAUTO 12V DC Portable Air Compressor Pump.

How do you compress live vocals?

While listening to your entire mix (do not solo the vocal), pull down the threshold until the compressor starts compressing. Add makeup gain as needed so the vocal doesn’t drop in volume. Adjust the threshold, ratio, and makeup gain until you can hear every word of the performance clearly.

You might be interested:  FAQ: How To Soundproof A Room For Recording Vocals?

How many compressors should I use?

Each compressor on your track should only be reducing the gain by 1-3 dB’s. So instead of using 1 compressor on the bass to turn it down 9dB, try using 3 compressors that are reducing 3 dB each. Though it’s technically the same amount of reduction, your bass is going to sound more dynamic and less compressed.

How loud should vocals be in a mix?

Every vocal is different and every song is different as well. But generally speaking, lead vocal should be moderately loud or the loudest element next to your drums in your mix.

Leave a Reply

Your email address will not be published. Required fields are marked *