- 1 What is the best vocal EQ?
- 2 What is the best EQ plugin for vocals?
- 3 What do professionals use to record vocals?
- 4 How do I get the best sound when recording vocals?
- 5 Is a condenser mic better for vocals?
- 6 What EQ frequency is vocals?
- 7 Should I use mono or stereo plugins on vocals?
- 8 What plugins do professionals use?
- 9 How do you equalize live vocals?
- 10 What level should I record vocals at?
- 11 How do you record vocals without distortion loud?
- 12 How do you record vocals in your bedroom?
- 13 Why do my vocals sound bad?
- 14 How loud should vocals be in a mix?
- 15 Why do my vocals sound muffled?
What is the best vocal EQ?
Best EQ Settings for Vocals
- Roll off the low-end starting around 90 Hz.
- Reduce the mud around 250 Hz.
- Add a high shelf around 9 kHz & a high roll off around 18 kHz.
- Add a presence boost around 5 kHz.
- Boost the core around 1 kHz to 2 kHz.
- Reduce sibilance around 5 kHz to 8 kHz.
What is the best EQ plugin for vocals?
15 Best Vocal Mixing Plugins
- FabFilter | Pro-Q 3.
- Maag Audio | EQ4.
- Universal Audio | 1176 Classic Limiter Collection.
- Universal Audio | Teletronix LA-2A Classic Leveler Collection.
- Celemony | Melodyne 4 Studio.
- Slate Digital | Eiosis e2deesser.
- FabFilter | Saturn.
- FabFilter | Pro-G.
What do professionals use to record vocals?
The standard microphone for vocal recording is a large diaphragm condenser. For 95% of situations, this microphone type will just work. If you are recording at home, I also recommend that you use a cardioid microphone.
How do I get the best sound when recording vocals?
Our senior recording engineer Andrew Dudman explains: “If getting close to the vocal mic I prefer a minimum distance of about 15cm.”. When positioning the microphone make sure the diaphragm of the mic is in line with your mouth. This should give you the most natural sound.
Is a condenser mic better for vocals?
Condenser microphones are best used to capture vocals and high frequencies. They are also the preferred type of microphone for most studio applications. Because of the thin diaphragm and increased sensitivity, condenser mics are often used to pick up delicate sounds. They also need a power source.
What EQ frequency is vocals?
Male vocals will tend to have their fundamental frequencies between 100–300 Hz, while the fundamental frequencies of a female vocal will usually fall between 200–400 Hz.
Should I use mono or stereo plugins on vocals?
If you record one vocalist, you should record him in mono. However, if you record two vocalists or more, you should record them in stereo. However, you should also consider the way you want your vocals to sound. And, recording vocals in stereo makes them sound wide, large, and soft.
What plugins do professionals use?
Top 10 Music Production Plugins Preferred by Top Producers Today
- Softube – Saturation Knob.
- Camel Audio – Camelcrusher.
- Xfer Records – OTT Compressor.
- Native Instruments Reaktor 6.
- Spectrasonics Keyscape.
- Xfer Records Serum.
- iZotope – Ozone Imager.
- Valhalla – Freq Echo.
How do you equalize live vocals?
To get the best results when equalizing live vocals, you must do six fundamental things:
- Start with flat EQs – Reset the EQ on the mixing console.
- Cut out the low-end rumble – Use the high-pass filter.
- Remove problematic (“hot”) frequencies – Add warmth to the sound.
- Take care of the proximity effect.
What level should I record vocals at?
You should record vocals at an average of -18dB for 24-bit resolution. The loudest parts of the recording should peak at -10dB and be lowest at -24dB. This is to keep an even balance on the level of the vocals without distortion.
How do you record vocals without distortion loud?
Another way you can tackle loud vocals is not to record directly into the microphone, another alternative you might want to try is backing away from the microphone and recording a bit far from it or you could simply turn your microphone a tad bit away from your mouth or input audio source.
How do you record vocals in your bedroom?
The mic should be roughly in the center of the room. The closer you are to the walls, the more likely you are to capture reflections and unwanted low-end build up. Avoid corners at all costs. Make sure you set up a pop filter and, preferably, a portable vocal booth like the Reflexion Filter if you have one.
Why do my vocals sound bad?
If your vocals are recorded in a bad room, it’s extremely obvious by the end of the mix. The room that an instrument is recorded in always changes the tone. This is ESPECIALLY true for vocals. Room reflections can also cause compression and pitch correction to sound unnatural.
How loud should vocals be in a mix?
Every vocal is different and every song is different as well. But generally speaking, lead vocal should be moderately loud or the loudest element next to your drums in your mix.
Why do my vocals sound muffled?
When recorded vocals sound muffled, it’s usually because there is too much energy in the lower frequencies. For a really good quick lesson on what a frequency is, see our post: Good Equalization and Frequency Basics.