Question: Where Should Vocals Peak When Recording?

How do you record vocals perfectly?

Step-by-Step Vocal Recording Checklist

  1. Before the session, choose a room with very little reverb.
  2. Use some acoustic treatment.
  3. Set up your equipment.
  4. Get a rough headphone mix going.
  5. Position the singer 6 inches away from the microphone.
  6. Add a small amount of reverb to the vocal.
  7. Get the vocalist to warm up.

Where should levels be when recording?

According to Pike, your audio level should stay on the negative side of the number scale and never go above 0. Anything above this results in distortion, which will make your audio torture to listen to. He suggests keeping your level at around -10 to -12, but this can vary depending on your project and your subject.

Where is the best place to record vocals?

Try to use a small-to-medium sized room with a lot of stuff in it. Specifically, with a lot of SOFT stuff like beds, couches, pillows, rugs and so on. You also want to avoid rooms with a lot of hard surfaces and windows. So your kitchen and bathroom are probably not the best places to record a vocal.

You might be interested:  Often asked: How To Edit A Song To Remove Vocals?

How do you record vocals without distortion loud?

Another way you can tackle loud vocals is not to record directly into the microphone, another alternative you might want to try is backing away from the microphone and recording a bit far from it or you could simply turn your microphone a tad bit away from your mouth or input audio source.

How loud should vocals be in a mix?

Every vocal is different and every song is different as well. But generally speaking, lead vocal should be moderately loud or the loudest element next to your drums in your mix.

How loud should my recordings be?

When you’re recording vocals, the level of decibels (dB) you record at is important. What dB should vocals be recorded at? You should record vocals at an average of -18dB for 24-bit resolution. The loudest parts of the recording should peak at -10dB and be lowest at -24dB.

What level should I record guitars at?

With digital recording, the most important thing is to not exceed the maximum signal level of 0 dB, and it’s a good idea to leave plenty of headroom. When setting levels, play the loudest you expect to play and aim for peaks of no more than -6 dB, with average levels around -20 dB.

How much gain should I record with?

In the digital world, 0dB = a ruined recording, so when recording/tracking, you’ll want to leave yourself some headroom. A clearance of -6 to -12 is recommendable. This means that the maximum (not average) level you want to see on the software’s input meters is somewhere between -6 and -12dB.

You might be interested:  FAQ: How Should I Record Vocals With Effects?

Is a small room better for recording?

The bedroom is probably the first and most common place to make recordings in a house. Many bedroom recordists follow home recording tips to make their songs sound as good as possible. Additionally, small rooms tend to enhance the sound of bass (although not always for the better!).

How do you record vocals in your bedroom?

The mic should be roughly in the center of the room. The closer you are to the walls, the more likely you are to capture reflections and unwanted low-end build up. Avoid corners at all costs. Make sure you set up a pop filter and, preferably, a portable vocal booth like the Reflexion Filter if you have one.

Why don’t I sound good when I record myself?

When you hear your voice on a recording, you’ re only hearing sounds transmitted via air conduction. Since you’re missing the part of the sound that comes from bone conduction within the head, your voice sounds different to you on a recording.

Why does my vocals sound distorted?

The most common reason for distortion is an input overload like the microphone overload mentioned above. Mic’ing an instrument, or even a vocal, is more than sticking a microphone right up to the sound source. A distorted sound can be resolved by placing a greater distance between the sound source and the microphone.

Leave a Reply

Your email address will not be published. Required fields are marked *