Question: How To Find The Right Gain For Rap Vocals?

What gain should vocals be at?

You should record vocals at an average of -18dB for 24-bit resolution. The loudest parts of the recording should peak at -10dB and be lowest at -24dB. This is to keep an even balance on the level of the vocals without distortion.

What effects should I put on rap vocals?

The best vocal effects for rappers include de-essing, pitch shifting, time alignment, and parallel processing. Other great plugins that can help improve rap vocals include stutter and reverse effect, vocal delay throws, saturation, submixes, and distortion.

What is a good compression ratio for rap vocals?

Generally, in normal vocals 2:1 to 3:1 ratio is good to compress the upper dynamics. But when the vocal is aggressive you need to compress more. So you have to increase the ratio up to 7:1. Probably, you would find the sweet spot anywhere 5:1 to 6:1.

Should Beat be louder than vocals?

Should Vocals be Louder than the beat? No and Yes! Well it depends on the genre and style you are mixing or what the song calls for. What you don’t want is a vocal poking out like a sore thumb in your song.

You might be interested:  FAQ: How Do You Take Out Vocals Of A Song Using Audacity?

Where should vocals sit in a mix?

Tip #1 – Here’s a top notch trick to get your vocals to sit on top of the mix nicely. Send everything but the vocals to their own aux, and apply a very subtle compressor (only a few dB’s reduction). Side chain the lead vocals to this compressor. This will dip the track by a 2 or 3 dB’s every time the vocals come in.

How can I make my rap vocals stand out?

And with these four tips, you should be well on your way.

  1. Use compression when mixing vocals. As just mentioned, humans are anything but consistent.
  2. Get the EQ right. Of course, there’s much more to good sounding vocals than simply volume.
  3. Don’t leave them too dry.
  4. Always keep context in mind when mixing vocals.
  5. Conclusion.

Should rap vocals be dry?

Using Delay Over Reverb The best way to mix rap vocals is to keep them relatively dry. We’re talking about mixing rap vocals that are aggressive and upfront in the mix. Traditionally, engineers will opt for delay instead of reverb to keep that vocal forward and present — not washed away in a sea of reverb.

Does voice Matter in rap?

The way you project your voice as a rapper is all important. It’s one thing having good lyrics, but if you can’t get your voice out there properly, they won’t have the same effect. Most male rap voices sound better with some bass in it as it makes it sound fuller. It makes your voice sound less ‘small’.

You might be interested:  Question: How To Do Screaming Vocals?

Do rappers hate their voice?

There are plenty of rappers that hate their voice and do some effect on it or pitch it up or down. A famous rap producer madlib, pitched up his voice and made a new alias quasimoto and released an album under the name. You can play with FX like vocoder, distortion, pitch-shift, or voice thickening delays.

How can I make my voice sound thicker?

Once you apply these ten techniques, your mixes as a whole will improve.

  1. Top-End Boost.
  2. Use a De’Esser.
  3. Remove Resonances.
  4. Control the Dynamics with Automation.
  5. Catch the Peaks with a Limiter.
  6. Use Multiband Compression.
  7. Enhance the Highs with Saturation.
  8. Use Delays Instead of Reverb.

What is a good reverb setting for vocals?

Move the pre-delay to about 30-40% or so as a starting point and see how it sounds. With your EQ, maybe set the high-pass around 200Hz and the low-pass at about 12kHz. In a situation like this, you may want to have more body in the reverb.

How do you get a punchy voice?

A fast attack (5ms) will make your vocals sound thick and heavy. A slow attack (30ms) will make your vocals sound punchy and aggressive. Dial in a medium release time of 40ms and adjust from there. Try to get the compressor pumping in time with the music.

Leave a Reply

Your email address will not be published. Required fields are marked *