- 1 How do you EQ vocals like a pro?
- 2 What dB should my vocals be at?
- 3 How loud should my vocals be in a mix?
- 4 Is a condenser mic better for vocals?
- 5 Is Pro Tools always recording?
- 6 Is Pro Tools good for recording vocals?
- 7 Does Pro Tools have comping?
- 8 What does compression do in Pro Tools?
- 9 How do I increase the volume in Pro Tools?
- 10 How do I automate audio in Pro Tools?
How do you EQ vocals like a pro?
Best EQ Settings for Vocals
- Roll off the low-end starting around 90 Hz.
- Reduce the mud around 250 Hz.
- Add a high shelf around 9 kHz & a high roll off around 18 kHz.
- Add a presence boost around 5 kHz.
- Boost the core around 1 kHz to 2 kHz.
- Reduce sibilance around 5 kHz to 8 kHz.
What dB should my vocals be at?
What dB should vocals be recorded at? You should record vocals at an average of -18dB for 24-bit resolution. The loudest parts of the recording should peak at -10dB and be lowest at -24dB. This is to keep an even balance on the level of the vocals without distortion.
How loud should my vocals be in a mix?
Every vocal is different and every song is different as well. But generally speaking, lead vocal should be moderately loud or the loudest element next to your drums in your mix.
Is a condenser mic better for vocals?
Condenser microphones are best used to capture vocals and high frequencies. They are also the preferred type of microphone for most studio applications. Because of the thin diaphragm and increased sensitivity, condenser mics are often used to pick up delicate sounds. They also need a power source.
Is Pro Tools always recording?
Remember that when you are using Quick Punch, Pro Tools is actually in record all the time you are playing, and although it displays separate Regions for each patch, in fact one complete file is being created for each pass.
Is Pro Tools good for recording vocals?
None of these DAWs have the speed and fluidity of Pro Tools when it comes to recording vocals. It also has an extremely nifty comping feature so you can record continuously into different “takes” and then easily choose your favourite take from a simple drop down menu.
Does Pro Tools have comping?
One of the major new features in Pro Tools 8 is a system for easily assembling comp tracks from multiple takes. The other main technique used by many people is to keep the separate takes as Playlists on a single track, and copy the best bits to a new Playlist on that track to create a comp.
What does compression do in Pro Tools?
Compressors and limiters are used to reduce dynamic range — the span between the softest and loudest sounds. Using compression can make your tracks sound more polished by controlling maximum levels and maintaining higher average loudness.
How do I increase the volume in Pro Tools?
Re: Adjust volume level in a track If you are using Pro Tools 10, you can just click on a silent spot and press B. It should split the region up where you clicked. A little volume fader will appear in the lower left region. Click there and turn up the slider until the waveform looks like the earlier louder wave forms.
How do I automate audio in Pro Tools?
To automate volume in Pro Tools, first change the Track View selector from the default “Waveform,” to “Volume.” The black line that now appears across the track represents the volume, or in actuality, where the fader sits at any given time.