- 1 Where can I eq female vocals?
- 2 How can I thicken my female voice?
- 3 Should you saturate vocals?
- 4 Should I put saturation on vocals?
- 5 How do you balance vocals in a mix?
- 6 How loud should my vocals be in a mix?
- 7 How do you mix vocals with a mastered beat?
- 8 What is the best EQ setting for bass?
- 9 What frequency should vocals be at?
- 10 How do you make lead vocals Fuller?
- 11 How do you fix thin vocals?
- 12 How do you warm up vocals?
Where can I eq female vocals?
Best EQ Settings for Vocals
- Roll off the low-end starting around 90 Hz.
- Reduce the mud around 250 Hz.
- Add a high shelf around 9 kHz & a high roll off around 18 kHz.
- Add a presence boost around 5 kHz.
- Boost the core around 1 kHz to 2 kHz.
- Reduce sibilance around 5 kHz to 8 kHz.
How can I thicken my female voice?
How to Thicken Your Lead Vocal
- Create up to 4 additional voices with the Wave Stereo Doubler.
- Subtly increase the quieter aspects of your vocal with a low level compressor.
- Create a concise reverb with quick reflections and a short reverb time.
Should you saturate vocals?
Various flavors of saturation generate harmonics and apply subtle forms of “soft-clipping” compression. This unique effect makes sounds fuller, punchy, and louder. Saturation also adds depth, presence, character, color, and warmth. Moreover, it does an excellent job of “gluing” groups of sounds together.
Should I put saturation on vocals?
Adding Vocal Depth with Saturation Another great time to use saturation is on vocals. Here you can use saturation as well as its heavy-handed brother, distortion.
How do you balance vocals in a mix?
Tip #1 – Here’s a top notch trick to get your vocals to sit on top of the mix nicely. Send everything but the vocals to their own aux, and apply a very subtle compressor (only a few dB’s reduction). Side chain the lead vocals to this compressor. This will dip the track by a 2 or 3 dB’s every time the vocals come in.
How loud should my vocals be in a mix?
Every vocal is different and every song is different as well. But generally speaking, lead vocal should be moderately loud or the loudest element next to your drums in your mix.
How do you mix vocals with a mastered beat?
How to Mix Vocals to an Already Mastered Instrumental
- Step 1: Reduce the Output Volume of the Mastered Instrumental.
- Step 2: Set the Input Gain at the Correct Level.
- Step 3: Apply Effects/FX.
- Step 4: Mix Your Project.
- Step 5: Create the Final Master.
What is the best EQ setting for bass?
On Android, I prefer to use PowerAmp, and it has one of the best equalizer settings, including stereo/mono setup.
What frequency should vocals be at?
Male vocals will tend to have their fundamental frequencies between 100–300 Hz, while the fundamental frequencies of a female vocal will usually fall between 200–400 Hz.
How do you make lead vocals Fuller?
Once you apply these ten techniques, your mixes as a whole will improve.
- Top-End Boost.
- Use a De’Esser.
- Remove Resonances.
- Control the Dynamics with Automation.
- Catch the Peaks with a Limiter.
- Use Multiband Compression.
- Enhance the Highs with Saturation.
- Use Delays Instead of Reverb.
How do you fix thin vocals?
How to Fix Thin Vocals
- Roll off the Rumble. Before we can beef up the vocals, it’s important to clean up the ultra-low end; frequencies below 100hz which can conflict with the tightness of the mix.
- Boost the Body.
- Lock it in with compression.
- Add Harmonics.
How do you warm up vocals?
3 Simple Ways to Add Warmth to Vocals
- Beware Cutting Too Much. Cutting the entire area between 250 Hz and 500 Hz might be overkill.
- Add Saturation Instead. Instead of boosting a bunch in the low-mids, some subtle saturation might help instead.
- Use Parallel Processing.
- How to get expert vocals?