How To Get Thick Rap Vocals?

How can I make my rap vocals thicker?

Parallel Compression – Parallel compression is the exact same thing as Parallel Processing, but you compress the track very hard and bring the volume gently underneath – This creates a thicker sounding track, or vocal in our case.

How do I make my singing voice thicker?

Use temporal, tuning, and low level compressing effects to create a vocal that sounds thick, and dense enough to cut through your mix. The idea is to create multiple reflections and voices, that can be combined with and augment the original signal.

How do you compress hip hop vocals?

Generally, in normal vocals 2:1 to 3:1 ratio is good to compress the upper dynamics. But when the vocal is aggressive you need to compress more. So you have to increase the ratio up to 7:1. Probably, you would find the sweet spot anywhere 5:1 to 6:1.

How do you make your singing voice darker?

You can add some thick reverb (Also with the higher frequencies cut)… You can also add a lower Octave with a harmonizer, blending it in until the vocal feels just dark enough, without the lower octave being too noticeable…

You might be interested:  Quick Answer: How To Extract Vocals From A Song In Fl Studio?

How do you warm up vocals?

3 Simple Ways to Add Warmth to Vocals

  1. Beware Cutting Too Much. Cutting the entire area between 250 Hz and 500 Hz might be overkill.
  2. Add Saturation Instead. Instead of boosting a bunch in the low-mids, some subtle saturation might help instead.
  3. Use Parallel Processing.
  4. How to get expert vocals?

How much should I compress rap vocals?

If your rapping to a trap beat which typically is bass heavy than you’re going to need a lot of compression for your vocals to cut through the mix. I would suggest using a ratio of 6:1 or 7:1 depending on the vocal performance and vocal tone. You will want a release of about 160 ms and threshold of -15 to – 20.

How do you mix rap vocals?

Using Delay Over Reverb The best way to mix rap vocals is to keep them relatively dry. We’re talking about mixing rap vocals that are aggressive and upfront in the mix. Traditionally, engineers will opt for delay instead of reverb to keep that vocal forward and present — not washed away in a sea of reverb.

How do you set EQ for vocals?

Best EQ Settings for Vocals

  1. Roll off the low-end starting around 90 Hz.
  2. Reduce the mud around 250 Hz.
  3. Add a high shelf around 9 kHz & a high roll off around 18 kHz.
  4. Add a presence boost around 5 kHz.
  5. Boost the core around 1 kHz to 2 kHz.
  6. Reduce sibilance around 5 kHz to 8 kHz.

What effects add to rap vocals?

The best vocal effects for rappers include de-essing, pitch shifting, time alignment, and parallel processing. Other great plugins that can help improve rap vocals include stutter and reverse effect, vocal delay throws, saturation, submixes, and distortion.

You might be interested:  How To Pull Vocals Out Of A Song Audacity?

Is FL Studio good for mixing vocals?

Is FL Studio Good for Recording Vocals? The short answer: Yes. Yes it is.

Leave a Reply

Your email address will not be published. Required fields are marked *