FAQ: What Frequencies Do I Cut When Mixing Vocals?

How do you cut vocal mixes?

How To Make Vocals Cut Through the Mix Using EQ and Compression

  1. Cut the Lows and Get Rid of Boom. Sometimes the vocal sounds on top of an arrangement because it doesn’t sit well in the low-end.
  2. Use Compression for Consistency.
  3. Boost for Character and Presence.
  4. Try That Next Time.

What level should I mix vocals at?

You should record vocals at an average of -18dB for 24-bit resolution. The loudest parts of the recording should peak at -10dB and be lowest at -24dB. This is to keep an even balance on the level of the vocals without distortion.

How do I make vocal rooms in a mix?

To make room for vocals in a mix, you can use specialized EQ (equalizing) techniques by inserting an EQ on any element that may mask the vocal and attenuating the major vocal frequency using a bell filter. You can also use sidechaining by placing a compressor on the elements you want to move.

Should Beat be louder than vocals?

Should Vocals be Louder than the beat? No and Yes! Well it depends on the genre and style you are mixing or what the song calls for. What you don’t want is a vocal poking out like a sore thumb in your song.

You might be interested:  How To Make Vocals Sound 1920s?

Where should vocals sit in a mix?

Tip #1 – Here’s a top notch trick to get your vocals to sit on top of the mix nicely. Send everything but the vocals to their own aux, and apply a very subtle compressor (only a few dB’s reduction). Side chain the lead vocals to this compressor. This will dip the track by a 2 or 3 dB’s every time the vocals come in.

What dB should your 808 be?

Just make it loud in the context of the mix. Start with all your faders down. Bring up the 808 so it’s at a reasonable level in your DAW (probably somewhere around -18 dBFS ). Then, bring in all of the other instruments around it.

How do you mix vocals with a mastered beat?

How to Mix Vocals to an Already Mastered Instrumental

  1. Step 1: Reduce the Output Volume of the Mastered Instrumental.
  2. Step 2: Set the Input Gain at the Correct Level.
  3. Step 3: Apply Effects/FX.
  4. Step 4: Mix Your Project.
  5. Step 5: Create the Final Master.

How do professionals mix their vocals?

In most genres, the vocals are the most important part of the mix. 10 Ways to Make Vocals Sound Modern & Professional

  1. Top-End Boost.
  2. Use a De’Esser.
  3. Remove Resonances.
  4. Control the Dynamics with Automation.
  5. Catch the Peaks with a Limiter.
  6. Use Multiband Compression.
  7. Enhance the Highs with Saturation.
  8. Use Delays Instead of Reverb.

Leave a Reply

Your email address will not be published. Required fields are marked *