FAQ: How To Make Rap Vocals Sound Bigger In Ableton?

How can I make my rap vocals thicker?

Parallel Compression – Parallel compression is the exact same thing as Parallel Processing, but you compress the track very hard and bring the volume gently underneath – This creates a thicker sounding track, or vocal in our case.

How do you make your voice sound professional Ableton?

Put your vocals to the mix, take away a little bit of bass, add a frequencies at the high end of the EQ – you’ll hear that this makes the vocals cut out better and gives the vocals more presence. Hopefully what you hear now is a good-sounding vocal, but still a bit thin and lonely.

How do you compress hip hop vocals?

Generally, in normal vocals 2:1 to 3:1 ratio is good to compress the upper dynamics. But when the vocal is aggressive you need to compress more. So you have to increase the ratio up to 7:1. Probably, you would find the sweet spot anywhere 5:1 to 6:1.

Why are my vocals so thin?

Boost the Body Try applying a low shelf filter boost with a Scheps 73 EQ around 200 Hz to get more meat out of your vocals. Vocalists that have a particularly “wispy” tonality may be in particular need of a boost in this frequency range, even if they’ve been recorded well.

You might be interested:  Quick Answer: How To Get Music Without Vocals?

Should vocals be panned?

The best way to give your mix a solid core is to keep lower frequency sounds in the center. That means kicks, basses and anything else below the 120hz range. If your track has lead vocals pan them center as well. But as a general rule lead vocals should always be panned center.

Does Ableton have autotune?

Auto-Tune® Pro, Auto-Tune Artist, Auto-Tune EFX+, and Auto-Tune Access are all compatible with Ableton Live 10.1 on both Mac and Windows. Auto-Tune EFX+ and Auto-Tune Access are compatible with Ableton Live 9.77 (64-bit) and later on both Mac and Windows.

Is Ableton good for mixing vocals?

You might not think it, but Live works brilliantly for recording, processing, and organising vocals, including harmonies, which is what we’re mostly talking about here.

How do you equalize vocals?

Best EQ Settings for Vocals

  1. Roll off the low-end starting around 90 Hz.
  2. Reduce the mud around 250 Hz.
  3. Add a high shelf around 9 kHz & a high roll off around 18 kHz.
  4. Add a presence boost around 5 kHz.
  5. Boost the core around 1 kHz to 2 kHz.
  6. Reduce sibilance around 5 kHz to 8 kHz.

Leave a Reply

Your email address will not be published. Required fields are marked *