- 1 Why do I sound flat when I record?
- 2 What does it mean when vocals are flat?
- 3 How do I record smooth vocals?
- 4 Do I really sound like my recording?
- 5 Why do I hum better than I sing?
- 6 Can a tone deaf person learn to sing?
- 7 What is perfect tone?
- 8 How do you record vocals without distortion loud?
- 9 What level should vocals be recorded at?
- 10 Should vocals be louder than the beat?
Why do I sound flat when I record?
There are sounds bouncing around in your head that your microphone or recording device can’t even hear. This means that the sound we’re hearing has both air-conducted elements (which the mic can pick up on) and bone-conducted (which it can’t).
What does it mean when vocals are flat?
What does singing flat mean? Breaking the term down, the use of the word ‘flat’ is what we call a note when it sits a one-semitone lower in pitch. So essentially, if you are singing flat, the sound of your vocals is sitting just a little lower than where it needs to be to sound in tune.
How do I record smooth vocals?
Once you apply these ten techniques, your mixes as a whole will improve.
- Top-End Boost.
- Use a De’Esser.
- Remove Resonances.
- Control the Dynamics with Automation.
- Catch the Peaks with a Limiter.
- Use Multiband Compression.
- Enhance the Highs with Saturation.
- Use Delays Instead of Reverb.
Do I really sound like my recording?
Most of what we hear is the result of air conduction. When you hear your voice on a recording, you’re only hearing sounds transmitted via air conduction. Since you’re missing the part of the sound that comes from bone conduction within the head, your voice sounds different to you on a recording.
Why do I hum better than I sing?
Longer answer: First, humming increases the “internal resonance” your vocal chords produce. This increases your ability to hear yourself while humming, and so if you have any ability to perceive tone, you will also be better able to tune yourself while humming than while singing.
Can a tone deaf person learn to sing?
Despite the term, most tone deaf people can hear music perfectly well – they just can’t sing. So those who claim to be tone deaf may score higher than expected, and feel encouraged to have a crack at making music. And the easiest instrument to try is the human voice.
What is perfect tone?
If you have perfect pitch – or ‘absolute’ pitch – you can sing or play any note on the spot, with no former guiding note. Only about one in 10,000 people have it, so if you do have the knack – go you.
How do you record vocals without distortion loud?
Another way you can tackle loud vocals is not to record directly into the microphone, another alternative you might want to try is backing away from the microphone and recording a bit far from it or you could simply turn your microphone a tad bit away from your mouth or input audio source.
What level should vocals be recorded at?
You should record vocals at an average of -18dB for 24-bit resolution. The loudest parts of the recording should peak at -10dB and be lowest at -24dB. This is to keep an even balance on the level of the vocals without distortion.
Should vocals be louder than the beat?
How loud should vocals be compared to instrumental. Vocals, especially the lead vocal should be louder than musical elements but a tad bit behind the drum transients in my opinion. But if you have an instrumental that has already been mastered and hyper-compressed which is often the case.